Posts Tagged ‘#stage’

Live_Stage_New2

Think of the stage as a speaker sitting in front of the audience….. sometimes the club or venue actually looks like a box where the performers are positioned. You have the low-end Bass Guitar, Kick Drum and Floor Tom and maybe keyboard sounds or textures. You have the Guitar and Vocals in a mid-rangy area and at the upper end you have symbols and higher range Guitar and Keyboard sounds. All inside the same box just a blasting away at different levels and pointed in all directions.

Now you have a better understanding of the challenge of making these various chunks into a tasty audio stew!

For the best way to present music to the savvy listeners of today, we do what has been done for decades. In the stereo image, you want to create a “room” or “place” for the listener. We have become comfortable with the very low end sounds coming from both speakers at about the same volume. This places the sound to the center of the listener’s field.

We like the vocals or in most cases the melody line to be in both sides equally, again placing the singer in the middle of the left-right field. We are fine if other instruments or singers are more to the left or right as long as the main sounds are where we expect them. We usually place big speakers on either side of the stage facing the audience…… usually in front of the stage and performers…. But as mentioned above this is not a finely tuned speaker cabinet by any means. The components are not necessarily proportionally balanced in volume or location. Setting up the Stage and PA system with this in mind can help reinforce the natural stereo image out in the audience.

Now that I have made a connection that is awkward if not confusing, even though the PA system in all likely hood is a Mono mix coming from both sides or columns of speakers, the listener still hears this as a stereo field. They want the low-end sounds or tones from the center of the stage. Typically the drum – the Kick Drum to be specific for this example – is the most used and most amplified instrument in band situations or where you have audio media. The Bass Guitar player is usually next to the drummer. This helps them keep tighter timing and solid beat, but also supports the stereo image of the listener.

Guitar and other amplified instruments on stage can be heard more from their side of the stage than from the other as an easy example, even if the volume through each side of the Main is sent the same level signal. If keyboards are on the opposite side of the stage from the guitar and also uses a monitor or amp, standing closer to them in front row can make it seem like the keyboards are too loud and those on the other side of the stage think the guitars are somewhat overbearing. It won’t stop them from standing there though! As you get further away from the front of the stage or if the venue is very large, this stereo effect has less and less meaning to the listener. Still, as a rule, most sound systems do not place low-end PA cabinets (or dumps) on one side of the stage and the mid or hi-end cabinets on the other side. It can be however, advantageous to place the low-end dumps in the center of the stage or along the front-center stage area. To make this more inclusive, it is also more comfortable to hear low-end tones coming from an elevation point lower (on the floor, for example) and the higher tones or frequencies coming from higher points (mounted above the stage or on tall poles).

If the volume on stage becomes to strong a level it will negatively affect all the above and more. To reinforce another post of mine, musicians just need to worry about performing great – we sound geeks will make them sound good and loud! I keep dreaming.

This was one of those amazing events that happen in your life. You get thrown together with really cool and creative people and work on a project. There are so many stories here it is a good thing that I need to break it up into a number of segments. I have already credited a lot of the experiences I had as a result of working at the music stores. This was another one of those. The employees were musicians by definition and we also had band and instrument teachers working there. Everyone played but quite a number of us wrote our own material as well. At the store I managed, we were a diverse group with a wide definition of styles. I did not own it, but it was MY store. I had an agreement with the owner that he not visit my location while I was there. I would run it my way and do the best I can as if it is my store. He agreed and for years I did exactly that. I took care of the people that worked and shopped there. I gave people real advice and information. We developed long-term loyal customers. It was a great team and we had a common goal – do good and we keep the owner out of our building! Great motivation.

A local radio station WOXY in Oxford, OH sponsored a Local Licks radio segment I think every Thursday night for a few months. I had submitted a few of my songs and one of them got played one week. Nice feeling to hear your stuff on the radio. I submitted a few more original tunes and suggested one of the other employees to enter some of his songs. He had more of an urban beat box groove thing going and he did all his own recordings. He did not think anything would come of it as his stuff is even more eclectic than mine! So he gave me a cassette tape – yes, a cassette tape! – and told me to pick the best songs and send them in under his name. I took his tape home and consumed it for hours. Then I made my decision and picked three songs to submit.  This is one of those funny things too. I sent in a song I thought had a great hook a nice arrangement and was really catchy in the genre he was in. I entered my next favorite that really pushed the drum/percussion thing he had going. I thought they had a good chance.

For the third song I threw in something that in all honesty was my attempt at ‘comedic relief’. I figured if I threw something out there that was really bizarre and off beat, they would think the other two songs were great by comparison. Not that the song was not great, but not a match for this heavy-leaning college radio station (… “the future of rock and roll” …..) The third song of his featured a banjo player and an off beat kind of groove. The Local Licks segments lead up to a radio version of battle of the bands. Songs played on Local Licks weekly segments would be entered into an elimination round on the last week the program aired. The finalists would have their songs played one more time as the winners were announced and then the bands would perform for just under an hour in a well known club in Cincinnati for prizes and glory.

As we listened to the local radio station during the elimination round there was a funny feel to the ‘winners’ moving ahead. There was an unusual flavor where songs you thought would be a shoe-in were dropped, and unusual tunes were advancing. Some songs were down right off the wall. There must have been a shift in judging but there were songs with unusual instruments in them getting to the finalists position. There was a song by a band called Tuba Blues. Another one I can’t remember had another unusual lead instrument and to think of it, as you remember one of my friend’s songs featured a banjo player!. Sure enough……. his song kept advancing. We were floored when they picked my friend’s third song! That night on the radio they announced the four finalists that would compete in a live battle of the bands event at Bogarts. Without pulling out records I think the event would be in about three or four weeks time from the announcement.

None of us at the store expected any of us to go that far, let alone to finalist. But none of us could believe that was the song that won! It was a fluke that I entered the song and that the judge apparently was looking for unusual instruments in rock and roll bands that year. Who da thunk? Once we met at work and talked it over it became obvious my friend had one problem; he was a soloist and there was no band! HA! The guitar teacher had a band called It. Ellen and I would join on keyboards and guitar and vocals and another employee and great friend over the years would join in on keys, guitar, vocals and a mean shaker! Each of us put in original songs to perform as a band and we rehearsed for a solid two weeks to try to get ready for this show. We knew numbers-wise we did not have a real chance of winning, but we were determined to make a show and event out of it.

……. All the while in the depths of a cave far from civilization, a Master of Ceremony was writing a series of short speeches that would be an added theatrical presentation between songs. Only the day of the performance did we see how this fit together and we had no idea what he was going to say – with the exception of a few word keys that would trigger a response from the band members, and occasionally the audience in return.

Fortunately we were all musicians currently involved in original songs and live performance. We had pretty good gear and we knew how to use it. We knew how to learn songs and how we can add to them or subtract as needed. Practice went well and started to be fun. The writer of the winning song chose the band name, and we made T-Shirts for all band members with the band name and studio logo; Willie the Ferret Studios. We worked out vocal parts as we had a number of vocalists and lots of harmonies and added speech. The lead guitar player was killer. His drummer was awesome and the bass player in their band IT, was solid and blindingly fast. With that foundation we just had to do our thing and it would all blend in fine. So we were ready enough but nervous as hell. A lot of things could go wrong here.

We get there and listen to the bands that were playing before us and there is a pretty good crowd at this point. We have our equipment squeezed up next to the stage entrance so we can rush in as soon as this band is done and moves their gear out. We set up fast. My keyboard controller does something funny and it takes me a while to fix it. No problem – tune guitar and ready to go. We look around and there are only a few microphones so we ask for more as we have a number of vocalists. They tell us no, that is what everyone gets. So as you see us a little unorganized and running from one side of the stage to another, it is changing instruments and trying to find a way for all vocalists to sing – or speak their part.  After a while it was just funny and we worked it out quickly for the most part and had fun with it.

The audience is not sure and a little uncomfortable with the speeches at first, but after a couple times and solid music everyone got the idea and joined in. The band has to settle down a little and the monitors and the mix takes a while to get used to. It is hard to hear some of the keyboard and vocal parts in some parts but that is to be expected. The writer of our winning song does not perform until the last song, so he helps with the Main House mix in the club. We were a little more involved than the regular rock band so he was able to plan ahead. I wish the lighting guy had help too. They seem a little lost at times but over all still a cool event.

https://www.youtube.com/watch?v=nbgku7Zst0s&feature=youtu.be

http://youtu.be/O7NFjfEoXWk

http://youtu.be/4qzLJLK42M8

I spent a lot of time in smaller clubs with crowded stages and audience sizes varying from handfuls to standing room only capacity. The challenges come from each of them and have different resolutions. In some ways, I think the large clubs and outdoor events are the easiest to set up and run sound for. If it is a big stage or large arena, you turn everything up so it is in the main mix or no one will hear it. The smaller clubs you don’t necessarily put a microphone on every instrument. You cannot out-power a guitar player with a stack of cabinets. You might not be able to set up independent or multiple Monitor Mixes (stage mix for performers) and many times you have to share monitors (the cabinets or speakers themselves in this case…) between performers with various needs. Add keyboard player(s) or a horn section and it quickly over burdens the PA or sound system.

Setting up the stage with a few solutions in mind can help in each of these situations. In smaller clubs you might not have many options for the arrangement of musicians on stage. Some restraints may be obvious at first. Some will catch you off guard. Knowing what you are up against though can trigger steps to prevent problems.

These are basic but can avoid a lot of small-headache issues:

Place snake closest to center of stage if that is closest to where instruments/vocalists are positioned. Shorter cables are better if they allow performers needed mobility.

Make sure you know where the AC power outlets are. It is a drag to set everything up and not be able to plug in your power amps. (I also recommend bringing long heavy-duty extension cords for versatility)

Try to plug all stage instruments and PA gear along with the mixing board and external sound gear to the same AC breaker box.

Try to plug all lighting or other powered systems to a separate AC breaker box. (If it does not connect to the mixing board to make noise; plug it into another breaker box)

Use balanced (three wire cables) whenever possible. (I have been caught by 1/4″ audio jacks without locks getting knocked out in the middle of a gig more than once and hate anything that does not lock into position. rant now over)

Keep stage volume as low as possible (this is a couple posts all by itself!)

Consider cross-firing stage instrument amps like guitars and bass – rather than pointing at audience.

Make sure sound board is in the best sounding location and also close enough to the stage to connect snake and all gear – especially if you have to route the snake around the outside of the event area for safety or other reasons.

Cables are the first thing to go wrong even when properly handled and maintained. Bring a lot of SPARES.

Turn all power amps (including ones that are built into the speakers OFF or all the way DOWN when connecting or disconnecting gear. (there are shortcuts and general exception practices we will detail later).

Turn all recording gear OFF or down all the way until all devices and channels are connected and tested.

Make sure speaker cables (Mains and Monitors) are long enough to reach the power amps. I bring two long length sets of speaker cables and two short length sets (no matter how many total speakers I have, I will have two full sets….). If one side of the stage is where the power amps are, I use the short cable and the other one might require the longer cable. Sometimes you need both long cables. If I need a spare, I have two!

Drum risers could need low end cuts and even gates to reduce unwanted tones and resonances.

Color Code anything you can. Cables, Mic stands, Monitors, In-Put Channel labels or External gear/boxes. Make it easy to identify in low light. Green microphone goes with green cable goes to green snake plugs into green channel….. I also add a number to make larger sessions manageable. Vocal green 1, 2, 3…. Drum blue 1, 2, 3….. Brass white 1, 2, 3……

Not rocket science, just some thoughts. But if you get in the habit of considering these and other tips each time before you start hauling in equipment into a new venue, your set-ups will become quick and routine, even if the environment is new. If you keep all your gear in one place there are short cut power-up and power-down sequences I will detail soon.

As a member of a cover band, I was given the opportunity to add something to my personal profile on the band web site.  I added a statement that went something like this; “we will play anywhere for free…..we just charge to move the equipment in and out”!

If you think about it, you would have to pay an awful lot of money to have ‘professionals’ move that much equipment.  Then they have to pack it all up and take it back at the end of the gig.  I have played keyboards, guitar, percussion and back up vocals in most of the bands I performed with.  Sometimes I also ran sound at the same time!  I was carrying so much gear for myself that I probably had more than the sound guy!  Once you haul equipment out of your house (I did not have duplicates, so what I used in the studio I had to tear down and take to the gig, set it up, tear it down, take it home and set it up in the studio again) and set up the gear you are all hot and sweaty and exhausted and now get to play for 4 plus hours, pack it all up and take it home.  Ahhhh, the glamourous rock and roll life.   Knowing all that, I think most people would be amazed at how little the local band playing the bar scene gets paid for all that work.   Maybe it is confusing because we call it ‘play’.  If I figured out an hourly rate I would probably get really depressed!

We also had to practice, individually and as a band.  No weekends free….  you get home at 3 or 4 in the morning and have to recover most of the day, then you play that night and do it all over again.  I always worked at a day job and still do, so this was about all the free time I had.  Now time for family, writing and recording projects and hopefully a little time in the sun.

Is it fun?  Absolutely.  I am an introvert and very shy in public, but it is a thrill to perform with great musicians and have the audience appreciate what you are doing.  I would not give it up, and if I were a bit younger I would still be out there.  At one point I told the band members that I would quit gigging out when I turned 50  – or my van broke down, whichever came first.  My van did break down first, but our light guy fixed it himself for free.  So I kept playing out.  Way past 50.  I recently stopped because tinnitus (a ringing in the ears from long exposure to loud sounds) got pretty bad in the last few years.  I only play out for special occasions these days, but it is still a blast.

Most of the connectors used for outputs will be 1/4″ male jacks.  These can be for ‘grounded’ (three-wire) or two-wire cables.  To make this part confusing, the cables can be made or changed with adapters to almost any connector type.  For long distances we prefer grounded or three conductor-wire cables as the third wire is used to take common signals from the other two wires, and ‘dump them to ground’.  Common signals would be interference and noise as the plus and negative wires are carrying the signal from the board.  The result is good signal with low noise introduced.  Guitar and keyboard cables typically go shorter distances and typically have a higher or stronger output signal than a microphone for example.  The cables in the snake will use three wire grounded shielded cables even if they are 1/4″ male connectors.

So we might expect to have an XLR connector for the Main Outs to the Main House power amps, but this is not a guarantee.  If 1/4″ jacks are provided it is recommended to use grounded three wire cables.

Most cables will provide a male connector on one end and a similar but female connector on the other end.  Male connectors are often used to connect to In-Puts and Female connectors are often used to connect to the Out-Put.  The male connector of the microphone cable connects to the mixing board In-Put and on the other end the female connector will connect to the microphone out.  Generally speaking there is little advantage plugging an in to an in or an out to another out.   I like to state the obvious LOL!

The mixing board will give us a Main Left and Right out, and probably a Mono Main Out.  These will be connected to the Main or House power amps.  During an event, the amps are usually turned all the way up and the House volume is ultimately controlled by the Main L-R faders on the mixing board.  This is why it is important to turn the Master Volume Faders on the mixing board all the way down whenever connecting or disconnecting equipment or making dramatic changes.

Depending on the board size and configuration you may also have a 1/4″ Direct-Out for many if not all input channels. (this is REALLY cool for recording and a lot of other creative uses…)   These can be really handy for independent channel recording, triggers, audio effects and alternate mixes to name a few.  Basically connect these to external recorder, processor or triggering gear as needed.  I will give some examples as the series expands to other main topics.  You will also have a number of Sends that are used for a variety of tasks and have different names, but with a few configuration details are for the most part the same thing.  Effect Sends, Monitor Sends, Auxiliary Sends, Sub Sends are splitters; they split the signal – keeping the one going to the House or recorder – and allowing you to send a lot or a little of that signal to the Send of your choice using the Send knob. As in the Monitor amps and House amps, the volume knob will ultimately be used to send the proper signal level to the external (and internal) devices or effects.  If you ‘send’ this to a digital delay, it may also have its own input and out put level knobs.

You may also have a two-track input and/or out put.  This is for playing stereo audio devices and for a straight stereo record out option.  Handy to listen to practice tapes, intermission music, PA system tests and other performance related media.

Reels of Tape”        (c) 1982 MSK 

Reels of tape feel no pain

Watch the movie over again.

Life pours past the flags unfurled

Crack the crystal paralyzed world.

CHORUS: I’ve been told if you live in the future,

You’ll be who you wanna be.

But I ain’t moving to San Francisco

‘Til it drops into the sea.

Careful surgeons with knives of rust

Open wounds of crimson lust.

Forget today and tomorrow.

Leave this song behind, and all it’s sorrow.

CHORUS: I’ve been told if you live in the future,

You’ll be who you wanna be.

But I ain’t moving to San Francisco

‘Til it drops into the sea.

First things first, but think about it twice.

Follow those who take their own advice.

Wasn’t trying any other time.

I’d walk away mumbling a Few Shattered Lines.

CHORUS: I’ve been told if you live in the future,

You’ll be who you wanna be.

But I ain’t moving to San Francisco

‘Til it drops into the sea.

Reels of tape feel no pain

Watch the movie over again.

Life pours past the flags unfurled

Crack the crystal paralyzed world.

https://itunes.apple.com/us/album/dark-energy/id962943592

This is one of the original acoustic tunes that’s featured on my new album “Dark Energy.” You can find it on ITunes or CD Baby under Michael S. Kennedy.

When I was listening to music in my early years, it seemed very natural for me to sing along with the songs I like or new tunes I heard.  I did not realize until years later that what I was doing was harmonizing with the melody, rather than duplicating it.  This was probably my first gateway into music creation.  I seemed to have a knack for developing harmonies.  Rhythms and timing also came to me without me understanding what I was doing.  Some people play sports, some are good at math, and some are builders.  I just seemed to feel comfortable with music.  My mother was in theater, radio and music and I have already blamed her for a lot of exposure to performing arts while I was growing up, so I will continue to do so!

The human voice is an amazing instrument.  There is nothing like it.  I know that I am not a powerful vocalist – I simply do not have the pipes it must take, but fortunately that did not stop my love for singing.  As I sang along more and more, I got better at finding the notes that would enhance or decorate the melody line.  I never tried to over power them, but to add to them.  Sometimes a song only needs a phrase or two highlighted by harmonies or echoing the melody.  Other tunes seemed to inspire harmonies throughout the song.  Eventually I would hear the melody in my head and sing along creating harmonies.  I could not begin to tell you how to create each note while singing… there are no manuals for this.  There are lessons to be learned and great teachers or vocal instructors, but the basics are not easily put into words.

When it comes to instruments, there is a certain amount of knowledge and practice involved in understanding where the right notes are and hitting them at the right time.  Just knowing the right ones to play are not enough as you have to know when and when not to play them.  I bring this up because a lot of musicians talk about jam sessions or getting together and without a lot of details, start playing new themes and using ideas from other musicians to create and have fun.  My point here is that I was never that comfortable simply bringing my instrument and jamming with others.  I do feel comfortable with harmonies and if asked to add percussion or drums, I could fit in.  But for me playing guitar, keys, bass, flute, sax, etc. without practicing and knowing what I was doing ahead of time is difficult.  Many of the musicians I worked with were absolutely great at this.  They were great at bouncing musical ideas off other players and coming up with gorgeous textures, themes and tonal landscapes.  I have a few early examples of jams and creative sessions I would like to offer here from time to time.

The sound board or audio mixer represents the hub in most audio mixing and mastering functions.  everything connects to the board.  Even the lighting system will use channels in the snake to connect from stage to console.  Things get plugged into and things get plugged out of the mixer as needed.  Today’s mixers are blue tooth USB WiFi fire-wired and light-piped together and will connect to an amazing array of devices.  So far we have focused on what gets plugged to the Inputs of the sound board.  There are a number of connection possibilities for the Outputs as well. We have already discussed some of them earlier, so this can be brief as you already know a lot of this in general.

On most sound boards you have a number of analog-out options.  In earlier discussions we talked about XLR and 1/4″ cables and connectors.  These will continue to be the main ones used for outputs.  On the front or face of most mixing boards you will see a stereo headphone out.  It will usually have its own volume knob and probably a selector to pick the options to Monitor including Stereo Out, Solo, Effects Sends, Effects Returns, Sub or Groups, Auxiliary Returns, and other options.  On the back or the top of the mixing board you will see the panel for Out-put connections in different sections.  There are some rules to determine what type of Audio Cable is used and whether it is a male end or female end and whether it has two connectors or three (or more).

In the early days of mixing boards, microphones and keyboards, it was important which brand you purchased.  If you wanted to get ‘that sound’ you had to have this mixing board channel strip or that particular keyboard.  Later on the computer industry similarly shot through their early days and you had the Macintosh or the Windows PC.  If you were brought up with one you could not be talked into the other.  Most modern equipment from PC’s to Automobiles can do everything.  They all have similar platforms and emulators.  There is style and quality as there always will be, but you can get software mixing programs and microphone/guitar emulator plugins that will make your audio tracks sound like anything you want —-THEY CAN EVEN MAKE YOU SOUND LIKE YOU ARE SINGING IN TUNE!!

So if you like Pepsi, no problem.  Want Coke?  Press this button……  More comfortable using a Mac?  Go for it.

All it takes is cash, a thorough understanding of what all the terms mean and a good idea where all the buttons are?!!?

Enjoy!

Much of my early years I had tons of energy.  Like most people my age, I got up early and stayed up through the evening.  Unlike most, I got a bit extreme with this and as I started working I seemed to be able to handle the after hour and evening shifts quite well.   Staying awake for 24 to 48 hours at a time was almost normal.  I obviously was not!  As most of the household was quiet and recharging their internal batteries, I would pull out my 12 string guitar.  In the very late and dark hours, I would reflect on the day(s) past and go over experiences I or friends had.  The fullness of the 12 strings (when I could afford to replace the old strings with new ones…) for me is just an amazingly soothing and inspiring environment.  The guitar noodling started to reflect a mood and the experiences would turn into words, phrases or thoughts that I would repeat and refine until they started to gel into lyrics.

I would use this method over and over.  Alone at night, lights out and everyone quiet or sleeping.  Even now, decades later, this is still my favorite time to reflect and create.  If you can, find your own time and environment that you can settle into quickly.  If you cannot find the time – MAKE it.  It does not have to be hours at a time.  Rarely do we write a masterpiece or complete a painting or poem in an hour or so.  The important thing is to set aside time – even little bits – and noodle, sketch, sing, or even think.  Build your stage for creativity and perform there as often as you can.  The masterpieces will create themselves…

Quiet Nights – An original tune I wrote based on this idea.

https://itunes.apple.com/us/album/dark-energy/id962943592

I have been very fortunate over the years in a number of ways.  As I look back on my history and the events I have been involved in, this rule became obvious to me.  I have always performed or created music with people that are much better than I am.  I did not do this by design, it just seemed to happen over and over.  One of my favorite bands I have been involved with for many years is Euphoria.  Think of all the adjectives you know to describe excellence and you can use them all for the members of the band.  They invited me to run sound for them and that is how I got the nerve to be a sound guy.  As they played out and I ran sound and helped with musical toys as a music store manager, we became great friends and shared a real passion for great music.  When the keyboard player decided to work on other projects, they found out I played keyboards and asked me if I wanted to take his place.  I cannot tell you how much courage it took to say yes.  I had never really played out before and we were into progressive rock and really complicated songs – many you heard clips from the studio demo posted earlier.

I knew I was not ready for prime time, but I got my keyboard gear together – practiced on my own every spare minute I had and forced myself to show up for practice.  I had big shoes to fill.  To their credit each of the band members were extremely patient!  The knew it would take me some time to get to their level.  Some songs on our set list were replaced with songs that had less emphasis on the keyboard until I could get my chops up to speed.  Some we had to drop altogether.  But they all worked with me and did not make me feel like I was slowing them down or not up to par.  Had it not been for their great attitude and flexibility, I may have thrown in the towel and called it quits before it got started.

The only better piece of advice in this area I think is just as important is to always play with great people!  Band life can be hard work, physically challenging and demanding and at the same time can be disastrous